View HES14-291_4684337.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

H HiTRON
AC/DC EXTERNAL DESKTOP ADAPTER UNIVERSAL INPUT MULTIPLE OUTPUT 14-16 WATTS SWITCHING POWER SUPPLIES HES14 SERIES
FEATURES:
ACCOMMODATE UNIVERSAL AC SOURCES DESKTOP WITH IEC320 AC RECEPTACLE MEET UNIVERSAL SAFETY STANDARDS EMI MEET EN55022/ FCC CLASS B CE MARKING COMPLIANCE
SPECIFICATION
INPUT SPECIFICATION
Input Voltage: 90-264Vac typical. Input Connector: IEC320-3P DT7 AC receptacle. Input Frequency: 47-63Hz. Inrush Current: 26A @230Vac typical. Input Current: 0.4A @115Vac/ 0.2A @230Vac typical. Dielectric Withstand: Meet IEC60950. EMI: Meet EN55022 / FCC Class B. Hold-up Time: 10mS @115Vac or 40mS @230Vac typical.
OUTPUT SPECIFICATION
Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: 14-16 Watts typical. Output Connector & Cord: Optional. Line Regulation: 0.1% typical. Load Regulation: Main O/P VO1 1.5-3.0% typical. Aux. O/P VO2 3.0-5.0% typical. Aux. O/P VO3 1.0-2.0% typical with P.R. Noise & Ripple: 1.0% peak to peak typical. OVP: Built-in "Latch type" on main output VO1 only. Latch type or Zener diode clamp for dual output series. Overload Protection: 125-150% typical of max. power overrange or short circuit, power foldback & self-recovering.
GENERAL SPECIFICATION
Efficiency: 74-78% typical. Switching Frequency: Approximate 35K Hz. Circuit Topology: Fixed Frequency Flyback circuit. Transient Response: Output voltage returns in less than 3mS following a 25% load change. Safety Standard: Meet UL60950/ EN60950 Class I. Class II for dual output series. Power Density: 1.12Watts / Cubic inch. Operating Temperature: 0 C to room temperature. Storage Temperature: -20C to +85C. Temperature Coefficient: 0.04%/C typical. Cooling: Free air convection. Construction: Impact resistant thermo-plastic enclosure case. Desktop Format.
NOTE: (1) All measurements are at nominal input, full load, and +25C unless otherwise specified. (2) Load regulation is measured at 115Vac or 230Vac in percentage to indicate the change in output voltage as the load is varied from half load to full load (%). (3) The exact obtainable load regulation depends upon the output cord selected and load current. Upper data are for 6 ft. (2 m) cord AWG#18 wires. (4) Due to requests in market and advances in technology, specifications subject to change without notice.
In application
-13-
OUTPUT VOLTAGE/CURRENT RATINGS CHART
SINGLE OUTPUT
MODEL NO. HES14-10 HES14-10A HES14-11 HES14-12 HES14-14 HES14-16 HES14-19 MAIN O/P VO1 TYP. 2.50A 2.20A 1.25A 1.00A 1.40A 1.50A 3.00A VOLT. 5.0Vdc 6.2Vdc 12.0Vdc 15.0Vdc 9.5Vdc 9.0Vdc 3.3Vdc
DUAL OUTPUT
MODEL NO. HES14-21 HES14-22 HES14-23 HES14-291 HES14-292 HES14-293 MAIN O/P VO1 TYP. 1.0A 1.0A 1.0A 1.0A 1.0A 1.0A VOLT. +5.0Vdc +5.0Vdc +5.0Vdc +3.3Vdc +3.3Vdc +3.3Vdc MAX. 1.5A 1.5A 1.5A 1.5A 1.5A 1.5A AUX. O/P VO2 TYP. 0.75A 0.60A 0.40A 0.75A 0.60A 0.40A VOLT. +12Vdc +15Vdc +24Vdc +12Vdc +15Vdc +24Vdc MAX. 1.5A 1.2A 0.8A 1.5A 1.2A 0.8A
TRIPLE OUTPUT
MODEL NO. HES14-30A HES14-30 HES14-31 HES14-32 HES14-33 HES14-34 MAIN O/P VO1 TYP. 0.75A 1.50A 1.50A 1.50A 1.50A 1.50A VOLT. +5Vdc +5Vdc +5Vdc +5Vdc +5Vdc +5Vdc MAX. 2.0A 2.0A 2.0A 2.0A 2.0A 2.0A TYP. 1.0A 0.2A 0.2A 0.1A 0.2A 0.2A AUX. O/P VO2 VOLT. +12Vdc +12Vdc +12Vdc +24Vdc +15Vdc +15Vdc MAX. 1.0A 0.5A 0.5A 0.3A 0.4A 0.4A TYP. 0.05A 0.20A 0.50A 0.20A 0.50A 0.15A AUX. O/P VO3 VOLT. -12Vdc -12Vdc -5Vdc -12Vdc -5Vdc -15Vdc MAX. 0.5A 0.4A 0.9A 0.4A 0.8A 0.3A
Symbol: " " OVP Built-in. "" Installed with Post Regulator (P.R.). " " Stacked on main output. Remark: (1) At least 20% of typical main output current is required to maintain stated regulation. (2) Max. load is the continuous operating load of each rail. But the max. load of each rail can not be drawn from all output at the same time.
MECHANICAL DIMENSIONS: MM [INCHES]
WEIGHT: 330.0g (11.6 Oz.).
-14-

▲Up To Search▲

Price & Availability of HES14-291

	To Download HES14-291 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .